| 產品快速搜尋 |
與我們聯繫
1. RS-232C Cable - Connect with computer but can use Hyperterminal in Windows
- - we use this to test pumps.
| Model |
KDS-120 |
KDS-270 |
KDS-260 |
| No
of Syringe |
2 |
4 |
4 |
| Syringe
Size |
10 ul - 140ml |
10 ul - 60ml |
10 ul - 60 ml / ea |
Push-Pull Syringe Pumps
The KDS260 is an adaption of the KDS210. The pump has been modified to hold
an additional syringe so that as one syringe infuses, while the second syringe
withdraws at the same rate. The Push/Pull mode is designed for one cycle only.
Features :
Holds up to four syringes, 10 ml to 60 ml each. With large syringes, the
full volume may not not be usable.
Backlit LCD display
Knob locks/unlocks drive block for effortless, drag-free adjustment
Simple menu-driven setup:
select syringe size from displayed table
dispense volume
dispense flow rate
Continuous dispense volume display
Preset volume control and automatic shut-off
Settings can be reviewed or changed during operation
Stall detection
Choice of unit selection
Last settings stored in permanent memory
Built-in RS-232C interface for computer "daisy chaining" up to 100
pumps
TTL interface for foot switch, timer, relay control, outputs for run indicator,
valve control
Independent rate and volume settings for infusion and withdrawal
Multiple mode selection:
Withdrawal for push/pull
Optional multi-step keypad programmable feature (KDS260P)
| Pump Type: |
|
| Max. No. of Syringes |
|
| Syringe Size |
|
| Dimensions |
|
| Weight |
|
| Linear Force |
|
| Advance Per Microstep |
|
| Max Step Rate (1/2 Step) |
|
| Min Step Rate |
|
| Accuracy |
|
| Syringe |
Minimum |
Maximum |
| 10 ul |
0.001 ul/h |
22.98 ul/h |
| 25 ul |
0.001ul /h |
60.68 ul/h |
| 50 ul |
0.001ul/h |
105.8 ul/h |
| 100 ul |
0.001 ul /h |
212.6 ul/h |
| 250 ul |
0.001ul/h |
527.6 ul/h |
| 500 ul |
0.001 ul /h |
1.06 ul/h |
| 1 ml |
0.001 ul/h |
2.203 ml/h |
| 3 ml |
0.001ul/h |
7.36 ml/h |
| 5 ml |
0.001ul/h |
14.33 ml/h |
| 10 ml |
0.001ul/h |
20.91ml/h |
| 20 ml |
0.001 ul/h |
36.19 ml/h |
| 60 ml |
0.001 ul/h |
86 ml/h |
