產品快速搜尋

 

 

傅利葉轉換紅外線光譜儀 FT-IR

for: Thermo Nicolet Perkin-Elmer Varian(Digilab) Bio-Rad Bucker Bomem Jasco Shimadzu Mattson Horiba Midac

Hardened aerospace grade stainless steel is used to produce all of ICL’s die sets. The 3mm to 16mm dies are used primarily for KBr pellets for transmission analysis by IR spectroscopy, while the larger dies are most commonly used for producing briquettes for XRF spectroscopy. The 13mm Macro-Micro die is chosen by most spectroscopists for KBr pellets, and it is available with paper inserts with a variety of small apertures (1.5, 3, 5, & 11mm) that enable the user to make micro-pellets with a 13mm die set and also provide a useful frame for mounting and storing the pellets.

All ICL dies have an upper and lower stainless steel section for ease of disassembly and they are sealed with viton seals. For ease of use, the weight was reduced in all die sets in the 13mm to 40mm range by adding an outer shield of aluminum. This feature makes them much easier to handle than 2 piece dies made completely from stainless steel due to their lighter weight, but without sacrificing strength or durability. The dies can be evacuated with a vacuum pump to reduce the moisture in the sample. 13mm and 20mm dies are typically used with 12 to 20 ton presses, while the larger size dies are used with 20 to 40 ton presses and are most commonly used for briquetting samples for XRF analysis.

To enable preparation of the finest quality pellets and briquettes, anvils are optically polished to a mirror finish and are free from scratches or digs. All die sets in the 13mm to 40mm size range are available with optional extremely hard tungsten carbide polished anvils for use with abrasive samples.

Features:

• Aerospace Grade Hardened Stainless Steel
• Optically Polished Anvils
• Evacuable

 

Square KBR Die

The dies are precision fabricated from high quality hardened stainless steel. Each die assembly includes a main body with a vacuum attachment, a base, (2) o'rings, (2) optically polished stainless steel pellets, a stainless steel plunger and a sample extractor cup to facilitate sample removal. The maximum rectangular size is 40mm x 20mm

 

Evacuable 13 mm KBr Die

有 3, 4, 5, 6, 7, 8, 9, 10, 20, 25, 32, 35, 40 mm 不同規格壓模器, 歡迎洽詢

Heated Plate

與油壓機配合使用,將 固體樣品加熱後,壓成薄膜後測試

Constant Thin Film Maker

固體加熱後,可以固定膜厚厚度,定量分析之用 具有15,25,50, 100, 250,500 micro 厚度, Up to 300。C

More Information

12 Ton 油壓機

For 13 mm KBr Die

與我們聯繫